Skip to main content
Linking a device means assigned one of your Taxi Butlers to a venue in the PORTAL. It will load all of your device configurations & options, pick-up address and other information onto the device. A device can only be linked to one venue. You can, however, add multiple devices to the same venue. If you’ve just added a new venue, you will automatically be prompted to link a Taxi Butler to that venue and enter the activation code.
1

Power-on your device

Start by powering on your device. The first time you power it on, an activation code will be shown on screen.The activation code will appear on-screen again when the device has been unlinked from a venue.
2

Enter the activation code

To link a device to an existing venue, go to the “Venues” page and select the venue you want to add the device to.Click on the “Taxi Butler(s) at venue” tab. Next, click on the “Add Butler to venue” button.The PORTAL will now prompt you to add a device to this venue. Enter the activation code found on the screen of the device into the PORTAL and press “Save”.
As mentioned above, if you’ve just added a new venue, you’ll automatically be prompted to enter the activation code for a device.
3

Activate the device

You must now activate your device by confirming on the device itself.Device activation is done differently depending on the type of device.
  • Taxi Butler ONE or PRO
  • Taxi Butler PLUS or KIOSK
Once you’ve enter the code in the PORTAL, simply click on the physical button to activate the device.
⌘I